The client is one of the world’s largest Energy companies, they had appointed a Principal Contractor to refurbish a large warehouse and production building, removing asbestos sheeting and replacing it with Kingspan Thermal Cladding. The clients group Health and Safety Manager approached Decom for advice on the methodology that should be used for roof work. Decom attended a meeting with the client and Principal Contractor and discussed in detail safe systems of work for working on the roof, the Principal Contractor did not understand the risks and Decom had already carried out some investigation into the companies past Health and Safety Performance and highlighted to the client previous falls from height that were logged on the Health and Safety Executive website which resulted in life changing injuries. Decom advised the client to re-tender the project as the Principal Contractor was not willing to adopt proposed safe systems of work. Decom was appointed Principal Designer for the project.

Warehouse and Production Building Refurbishment

DECOM oversaw the procurement process, developing a detailed scope of work and bill of quantities for contractors to price and non negotiable safe systems of work to be used on the project. The client asked internally around their global operations if other site had undertaken a similar project, one site had and the safe systems of work for roof was the same method as DECOM had suggested. DECOM re-tendered the whole project and interviewed bidders regarding safe systems of work for the project, most companies used the system Decom had suggested already and a indepth check of their past Health and Safety Performance the preferred bidder was appointed as Principal Contractor. DECOM checked and approved all Principal Contractor RAMS and competencies of individuals and carried out safety audits and quality audits throughout the project, attending and chairing meetings with the clients senior management team, DECOM picked up on and highlighted a serious hazard that was uncovered during the removal of cladding, this was immediately made safe and highlighted to the client and Principal Contractor. A challenging part of the project was the lifting of a drum heater onto the first floor, this involved removal of a section of the roof purlins and rafters in order to lift the 10m x 4m 5 tonne drum heater into the building, DECOM checked the lift plan, position of the crane and attended site to manage the lift. All work was carried out safely with zero incidents or accidents and DECOM managed more than 10,000 work hours without incident or accident, completing the project within programme and budget.

Scope
Introduction

Decom Limited 

+44 (0) 7523 181422
admin@decomgroup.co.uk

This website and its content is copyright of Decom Limited - ©Decom Limited 2023. All rights reserved.

Follow Us